Bikes We Feature


Trek based in Waterloo, WI in 1975 is driven by adventure, guided by their history, inspired the community, enchanted by the freedom of the open road and committed, always, to creating the world's greatest Bicycles. 



Cicli Pinarello is an Italian bicycle manufacturer based in Treviso, Italy. Founded in 1952, it supplies mostly handmade bicycles for the road, track and cyclo-cross.


BMC Switzerland  is a bicycle and cycling product manufacturer based in Grenchen, Switzerland.BMC designs, builds and distributes road bikes, mountain bikes, and commuter bikes 


Cannondale introduced its first bicycle, a Touring model, in 1983. They raised the cycling world's eyebrows by building our bicycles around handcrafted, oversized aluminum frames that were both lighter and more flex-resistant than the steel models that dominated the industry at the time.


Seven Cycles is an American bicycle designer and manufacturer based in Watertown, Massachusetts. Custom-Built Carbon, Titanium and Steel Bicycle Frames.

Yeti Cycles was founded in 1985 is an American bicycle manufacturer located in Golden, Colorado. Yeti Cycles featuring some of the best mountain bike designs in the industry. 


Cervélo Cycles is a Canadian manufacturer of racing and track bicycles. Cervélo uses CAD, computational fluid dynamics, and wind tunnel testing at a variety of facilities including the San Diego Air and Space Technology Center, in California, US, to aid its designs. 


The only hard part about riding an Electra bike is choosing which one to get. They're all easy to ride and they look amazing.


Custom to Order 

Felt Bicycles was founded in California, a land of pioneers, entrepreneurial mavericks, technology-driven mavens, and the most passionate outdoor fanatics you’ll find anywhere. Since 1991, they have strived to be the most innovative cycling company on the planet. They are devoted to creating the finest cycling experience in the world because we love nothing more than bikes and what they can bring to the human experience. From conquering an alpine climb to descending technical singletrack, from the thrill of racing to the forging of camaraderie on a group ride with friends, nothing compares to the act of pedaling. Wherever you are in your two-wheeled journey, Felt invites you to join them for the ride.



Officina Dario Pegoretti creates custom and standard size steel bicycle frames, built with a sense of possibility, ingenuity and artistry, “fatti con le mani” from its workshop in Verona, Italy. Company founder and namesake Dario Pegoretti first came to prominence while apprenticing with master Italian framebuilder Luigino Milani in the 1980s, building custom bicycle frames under contract for that decade’s best professional racers, who placed their own sponsors’ decals over Dario’s hand-welded framesets. In 1990, eager to experiment with new forms and techniques, Dario set out to build frames in his own name, developing a signature style that melded art, music and strikingly innovative techniques. At the same time, he established a team of artisans capable of interpreting his vision. As the years passed, awards came in, and frames were sent out. Jack, the workshop dog, oversaw all, maintaining a strict regimen of a single daily espresso. After Dario’s passing in 2018, the “Bottega” continues to be inspired by his unique outlook on life, and today, the workshop remains a place for those who seek individual, honest products, built with precision, quality and timeless style.


Name a frame builder with employees that have been with them for 40+ years… That list is even smaller when you add that the company is in the USA and is not producing frames in Asia. Lynskey Performance is uncommon. The Lynskey’s founded Litespeed the company was sold to a large investment firm, but it was still basically the family business after the sale, with Mark Lynskey staying on to run Litespeed. It was a bit of scheming from their mother Ruby that brought brothers Mark and David Lynskey back together after Mark decided it was time to leave Litespeed. And it is the core of Litespeed that formed Lynskey.  Lynskey manufacturing company is based in Chattanooga, Tennessee.

Waterford Precision Cycles has over a quarter century creating innovative designs, crafting from the finest steels, fitting like your favorite shoes and finishing like you would for your best friend.

It’s all about the ride and the pride you experience as you race, train and explore with your Waterford.

   


Beautiful Gunnar Bicycle Frames from Yellow Jersey.. They are built at Waterford, Wisconsin by the Waterford Precision Cycles staff, using the same premium air tempering seamless tubes, built on the same tables, painted in the same paint shop and designed by the same designer as Waterfords.
 


"Working hard to stay small" Having run "big bike companies" before,  Andy and Gerard were ready for a change. Now they design bikes for themselves, sell them to like-minded people, take care of their customers and that's it.If that sounds good to you, come join the OPEN family. Andy & Gerard

Ibis Bicycles was founded by Scot Nicol, one of the earliest mountain bikers in Northern California. It began in Nicol's garage in 1981, when a friend asked him to build a frame. Nicol sold the company to an investment group in 2000 and it went bankrupt within 20 months. Ibis returned to the industry at the 2005 Interbike trade show. Nicol has since partnered with Hans Heim, formerly of Specialized, Tom Morgan, and Roxy Lo.


Chris Cocalis is head of the 2007 founded bike company, a man who looks back at a long history in the biking industry. At a young age, Chris made the difficult decision to end his studies after his degree in accounting and chose life in the bike business. He started with self initiated projects, the management of several bike shops, as part of the US Cycling Federation he went to a mechanics workshop. He started Titus Bikes with investors and gained lots of knowledge in the process. Over the years he turned into a real frame specialist as well as designing, developing and welding on his own. Today one can find 34 employees working for Pivot Cycles. Several distribution channels make it easy to acquire Pivot bikes in over 30 countries.



In 2005, Surly began selling the Pugsley, a mountain bike with large volume tires up to 5 inches wide for deep snow and sand riding. The front and rear wheels share a common hub size and can be interchanged, allowing for redundancy and additional gearing combinations. Noted bicycle technical authority Sheldon Brown said, "Pugsley is, in its way, as revolutionary as the original mountain bikes were in the early 1980s.



Salsa Cycles was founded by Ross Shafer in 1981 or 1982. Initially he focused on producing bicycle frames and custom stems. Salsa makes bike frames out of aluminum, carbon fiber, titanium, and chromoly steel. They build , gravel bikes, touring bicycles, fat tire bikes, bikepacking bikes, and gravel bikes, as well as full-suspension mountain bikes.


Heller is based out of Bloomington, MN and makes solid, fun bikes that get the job done for a good value. They use high quality frame suppliers to ensure that their bikes have a solid foundation for upgrades later. 

All-City's goal is to make a significant contribution to the equipment and culture of urban cycling. This is not a cash in, this is not a fad, this is their life, their love, their community and their dream. They are a company of riders making products for other riders. They share a lifelong passion for the machines, the people who ride them, and the positive changes both can affect in this world.

BMX Bikes We Can Order


FIT BIKE CO. is an American BMX brand founded in late 1999 by S&M Bikes in Santa Ana California. The first FIT product released was the Made in USA, SERIES ONE frame in 2000. FIT quickly built a legendary team in the early 2000’s that included Brian Foster, Mike Aitken, Jason Enns and John Van Homan, all of which still ride on the team today. The FIT brand has been owned and operated alongside S&M Bikes in Santa Ana CA since day one, and continues to offer a full range of American Made parts and accessories as well as imported complete bikes around the world. Also known as FBC, F-it, and Fit Bicycle Company.

 

The company was founded in 1978 by Bob Haro. Haro started out producing number plates for BMX bikes in his Home. Demand for these stylish plates quickly outgrew his one-man capacity. Haro Designs, the first name of the company, was formed in 1980 with headquarters in Torrance,Ca. While the company was growing, Haro was also growing the sport of freestyle BMX. He travelled around the country performing demos of radical trick riding that had not been seen anywhere before. As a result, Haro earned the title "The Father of Freestyle". During the early eighties, the company grew rapidly by expanding its product line and establishing national and international distribution. The BMX boom was in full swing and the company built a reputation for developing innovative, top-of-the-line BMX and freestyle bikes and accessories. Haro Bikes' most popular BMX/Freestyle models were the Master and the Sport.

From their Southern California beginnings in 1972 to today, they continue to remain true to our BMX and mountain bike heritage. GT mixes performance with serious fun to deliver good times everywhere our bikes are ridden. Because after all, Fun is Serious Business.

  

Founded in 1994. They company stems from Rochester New York. It has been known for years for not only making extremely well built bikes, but for their style as well durability. It doesn't matter if you are just looking to start in BMX or are already at a pro level Kink has a bike perfect for you.Starting as a BMX parts company, Kink has grown to offer everything from small parts to complete bikes, along with having one of the most influential teams in BMX.

 

Redline Racing Frames was founded in 1970 by Linn Kastan and Mike Konle in Chatsworth California for making chromoly motorcycle frames and swingarms. The company consisted of a staff of six people and was receiving much success with their motorcycle swingarms. In 1973 Kastan decided he would weld a bicycle frame for his son as a Christmas gift that same year. His son soon raced this bike under his fathers company name Redline. 


Eastern Bikes has 20+ years in the BMX bike industry creating complete bikes, frames, forks, tires and everything else to build a quality ride. Eastern Bikes may have started in 1996 but the idea was sparked sometime in 1992 when Mike Corley had problems with a frame he was running and the company wouldn’t warranty it. Mike was taking welding classes at the time. He wanted a frame he could trust, so he decided to take measures into his own hands. Mike didn’t actually do the welding but knew enough to cut the tubes and get the pieces ready to weld.

Speciality Bikes We Can Order



Sun is a Family Owned Company since 1971. They grew up riding bikes around their Miami neighborhood. Not only was it a way of life but it was the family business. They developed Sun Bicycles using the colors, shapes, and geometry of what experience taught them to be the truly perfect ride in the sunshine. They were inspired by the Miami skies and the pure unadulterated leisure experience that defines that lifestyle.



The company was founded in 1982 by David T. Hon, a former laser physicist, and is headquartered in  Los Angeles, California.  Dahon holds over 200 patents, some having become industry standards.