$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
$25.00 $89.99 72% Off
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up. - Machined from 2014 Aluminium - Weight-saving single bolt faceplate
Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer the same stem used by the Sunday team at a very affordable price. - Reach: 52mm - Stack Height: 33mm - Rise: 34mm (1mm drop when inverted) - Clamp Bolts: M6 x 1.25mm pitch (x4) - Pinch Bolts: M6 x 1.25mm pitch (x2) - Weight: 10.5 oz
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy
Ritchey's first full-carbon stem was designed to meet the needs of high-wattage European Classics specialists. The Carbon C260 adds to the amazing strength-to-weight ratio of our C260 alloy and Carbon Matrix stems through the use of high modulus carbon fiber, increased boom diameter, and a wider clamp. Gram-for-gram, this is the lightest, stiffest full carbon stem on the market, making it the most advanced Ritchey stem ever. - C260 bar clamp creates a larger stem-to-bar interface, drastically reducing bolt stress - 4 x T-20 faceplate bolts and patented 260-degree bar clamp design reduces weight, increases stiffness, and distributes stress more evenly - 3 x T-20 steer tube bolts and curved clamp slot reduces weight and steer tube stress - Fits most road and mountain bars - Material: Carbon with 2014 alloy faceplate - Length: 90mm - Angle: 84/6 degree - Stack: 42mm - Faceplate width: 42mm - Steerer: 1-1/8" - 125g (110mm)
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Built strong to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Direct mount stem gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design - Designed to pair with BoXXer fork
Balancing design, materials, and manufacturing techniques allow the Kink Bold HRD to truly be a solid and affordable stem. The die-cast aluminum body is paired with a forged 6061-T6 aluminum cap, providing additional strength. A counterbore in the stem body allows the fork cap bolt to thread down flush for a clean look. The classic 50mm reach comes with a comfortable 32mm rise and a traditional 6-bolt system. Chamfered edges and radiused corners give the stem a clean look and knee-friendly design. TECH SPECS - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Material: Aluminum Body and Forged Aluminum Cap - Bolts: Solid w/ 6mm Allen Hex - Weight: 10.7oz
Ritchey's 4-Axis Adjustable Stem features a precision 3D-Net shaped forged shaft that interconnects with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. - Stainless steel bar and steerer clamp bolts - Stack Height: 40 - Weight: 219g
MSW 17° stems raise the bar--literally--for what riders can expect from an inexpensive stem. Available in lengths from 60-120mm for custom-fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
Syntace's F44 is a direct mount stem intended for rock-solid control on dual-crown forks. Sabertooth bar clamp design ensures no bolts or clamping surfaces protrude, and wide, cantilever-style mount arms provide a low profile. - Weight: 91g
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
Page 1 of 5 Next page