Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Wheels

CycleOps Trainer Skewer
$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Bontrager Jackalope Fat Bike Rear Wheel
$164.99 $516.99 68% Savings
More awe-inspiring than a rabbit with antlers, Bontrager's Jackalope wheels deliver unprecedented fat bike tire performance. Outfitted with Bontrager's TLR tubeless ready technology, you can quickly set up these wheels to run insanely low pressures for snow, sand, and dirt dominance. The Jackalope's Offset Spoke Bed (OSB) reduce wheel dish allowing balanced spoke tension for awesome stiffness and stability - something incredibly valuable when you're handling all that rolling mass. • Interchangeable axles allow for compatibility with a variety of frames and forks
Bontrager SSR Disc Road Front Wheel
$194.99
Whether you're touring, building the ultimate commuter or just want excellent stopping power on the road, Bontrager's Select Disc Road Front Wheel is a sweet choice. Free speed will be yours thanks to the low-profile aero rim and 24 spokes that aren't afraid of rough roads. Plus, the hub is easily serviced and features polished, ground bearing races, a forged shell and a chromoly axle for top-notch durability.
Bontrager Aeolus 5 D3 TLR Rear Clincher
$1,299.99
Race faster and train better with the lightweight Aeolus 5 D3 TLR carbon wheels. A wide 19.5mm internal hook bead and aero D3 rim shape deliver more speed, performance and control. •D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge •OCLV is ultra-light, compliant and durable, the most advanced carbon available •TLR rims allow for quick transition from traditional tires to tubeless systems •Stacked Lacing - Provides a better spoke bracing angle for a stiffer wheel •OCLV Carbon 27mm outer, 19.5mm inner width, DT Swiss internals w/star ratchet •Cassette compatibility: Shimano/SRAM 10/11spd (Campagnolo freehub sold separately) •Includes Carbon Stop Cork pads, TLR rim strip, TLR valve stem, Bontrager internal cam quick release •No rider weight restrictions
Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Stan's NoTubes Standard Tubeless Kit
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Bontrager SSR Disc Road Rear Wheel
$204.99
Whether you're touring, building the ultimate commuter or just want excellent stopping power on the road, Bontrager's Select Disc Road Rear Wheel is a sweet choice. Free speed will be yours thanks to the low-profile aero rim and 24 spokes that aren't afraid of rough roads. Plus, the hub is easily serviced and features polished, ground bearing races, a forged shell and a chromoly axle for top-notch durability. And the 130mm and 135mm Over Locknut Dimension (OLD) hub options makes these wheels usable on both your road or cyclocross frames.
Wheelsmith Straight 14g (Silver) Spoke
$31.50
- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50
Zipp 30 Front Wheel (Clincher)
$364.00
Tick the miles away with Zipp’s 30 aluminum clinchers. Built on stiff, durable 30mm-deep rims, the 30s are rugged, light, and fast. The 21.5mm-wide tire bed enables supple cornering control and ride comfort while simultaneously minimizing pinch flats. Zipp’s stiff hubs offer seemingly endless miles of smooth riding, and they're laced with Sapim CX-Ray spokes so you can rest assured that your power gets transferred directly to the road.
Zipp 30 Rear Wheel (Clincher)
$430.00
Tick the miles away with Zipp’s 30 aluminum clinchers. Built on stiff, durable 30mm-deep rims, the 30s are rugged, light, and fast. The 21.5mm-wide tire bed enables supple cornering control and ride comfort while simultaneously minimizing pinch flats. Zipp’s stiff hubs offer seemingly endless miles of smooth riding, and they're laced with Sapim CX-Ray spokes so you can rest assured that your power gets transferred directly to the road.
DT Swiss Revolution 14/17/14g (Black) Spoke
$95.70
- Double butted 2.0/1.5/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - Includes 12mm 14g silver alloy nipples - 143g @ 32/265mm - Box of 72
Stan's NoTubes Enduro Rim Strip
$22.50
Stan's Enduro Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Standard Rim Strip
$22.50
Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Freeride Tubeless Kit
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Freeride Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Valor Team 29 Rear Wheels
$825.00
Lighter and stronger than aluminum rims, the Valor’s carbon lay-up is engineered to absorb radial vibrations and impacts through a construction that is both elastic and strong. Stan's NoTubes has constructed a lightweight carbon fiber rim design not just to be stronger than aluminum, but also to perform better in real world riding conditions. Valor wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for cross country racing and riding - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Laser 1.8/1.5/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider tires / 2.00 - 2.25 - 2-year warranty with 3-year crash replacement
Stan's NoTubes Universal Kit Rim Tape
$6.00
Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.
Vision Presta Valve Extender
$5.99 - $6.99
Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum extender comes with a small tool (not shown) for an air-tight installation.
Shimano Dura-Ace Track Hi-Flange Front Hub
$149.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
Shimano Deore XT WH-M8000 Race Wheels (29-inch)
$537.99
• Model Number : WH-M8000 • Series : DEORE XT • Brake Type : Disc Brake • Axle Type : QR • Over Locknut : 100mm • Axle Length : 108mm • QR Skewer Length : QR skewer lenght: 133mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 23.9mm • Recommended Tire : 29x1.90-2.25 • Faster acceleration and smoother rotation • High rigidity and durability. • 28pc butted spokes (F&R). • Offset rim design with better spoke tension balance for durable wheel construction.
Wheels Manufacturing Inc. CN-R002 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Rear Left Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag - Note: O-ring / seal not included. Check the seal groove closely. This cone has a wider groove than cone CN-R024. COMPATIBLE HUBS: - Ultegra 6401 7-speed Rear - Ultegra 6402 8-speed Rear - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R083 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R084 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R085 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle
Wheels Manufacturing Inc. CN-R086 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R088 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 13mm - Threads: 9.5mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Taiwanese hubs with 9.5mm x 26tpi axle
Wheels Manufacturing Inc. CN-R089 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9.5mm x 26, rear alloy, steel front hubs - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 15mm - Threads: 9.5mm x 26 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Fits: JoyTech 9.5mm x 26, rear alloy, steel front hubs - Taiwanese hubs with 9.5mm x 26tpi axle
Wheels Manufacturing Inc. CN-R096 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.7mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Ultegra 6400 Front - Shimano 105 HB-5500 Front - Shimano 105 HB-5501 Front - 105 SC 6400 Front
Wheels Manufacturing Inc. CN-R097 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear
Wheels Manufacturing Inc. CN-R098 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 9.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear
Wheels Manufacturing Inc. CN-R024 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag Note: O-ring / seal not included. Check the seal groove closely. This cone has a narrower groove than cone CN-R002. COMPATIBLE HUBS: - 105 FH-5700, 9 speed (right side cone) - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - Deore LX M550, 7 Speed Rear - Deore Mtn LX M550, 7 Speed Rear
Page 1 of 36 Next page